Table of Contents
Advertisement
SPECIFICATIONS: SYNC POE ANALOG CLOCK
Power over Ethernet (PoE) Analog Cocks receive both power and data from a PoE enabled network. Optionally, power
and data can be supplied with use of a Primex AC power adapter (optional accessory) and an Ethernet network.
Power over Ethernet
Power
Network
Communication
Protocols
Operation
Environment
Certifications
Warranty
Compliant with IEEE 802.3af standard and compatible with 802.3at standard
Input power: 48V, 6.25 Watts Max
Optional AC power adapter: 5V DC USB Mini B (5 pin) connector interface, 5 ft (1.5 m)
cable
• IP Addressing: Dynamic Hosting Configuration Protocol (DHCP); may also be
configured with static IPv4 address.
• Network Communication Protocol: Hypertext Transfer Protocol Secure (HTTPS)/TLS
• Data Packet Size: typically less than 5 kilobytes (kB)
• Automatically adjusts for Daylight Saving Time (DST)
• Automatically performs a daily midnight hand verification check. When check fails for
three (3) consecutive days, the clock enters a hand position failure status.
• If power is interrupted, the clock stops until power resumes. Upon resumption of
power, the clock self-corrects to the current time.
Operating Temperature Range: 32° to 95° F (0° to 35° C); indoor use only
Storage Temperature Range: -4° to 158° F (-20° to 70° C)
FCC, CE, and IC compliant
1 Year Limited Warranty
Page 4
Advertisement
Table of Contents
