User Guide for the T46S Skype for Business phone
Press
2.
field.
Press
3.
Press
4.
Enter the desired value in the IP Address, Subnet Mask, Gateway, Primary DNS and
5.
Secondary DNS field respectively.
Press the Save soft key to accept the change.
6.
The LCD screen prompts "Reboot now?".
Press the OK soft key.
7.
This configuration will take effect after a reboot.
Static IPv4 address is configurable via web user interface at the path Network->Basic.
Configuring the Static IPv6 Address
To configure a static IPv6 address via phone user interface:
Press Menu->Setting->Advanced (default password: admin) ->Network->WAN Port.
1.
Press
2.
field.
Press
3.
Press
4.
Enter the desired value in the IP Address, IPv6 IP Prefix, Gateway, Primary DNS and
5.
Secondary DNS fields respectively.
36
or
, or the Switch soft key to select IPv4 or IPv4 & IPv6 from the IP Mode
to select IPv4, and then press the Enter soft key.
or
, or the Switch soft key to select the Static IP from the Type field.
or
, or the Switch soft key to select IPv6 or IPv4 & IPv6 from the IP Mode
select IPv6, and then press the Enter soft key.
or
, or the Switch soft key to select the Static IP from the Type field.