Using Better Together Over Ethernet - Yealink T46S Skype for Business User Manual

User Guide for the T46S Skype for Business phone
To set your phone as your primary audio device
In your Skype for Business client, click the audio device icon.
1.
Select your phone as your primary device, as shown below.
2.
Note
If Yealink SIP-T46S Phone is not selected as audio device, you will not be able to use BToE
feature (for example, calls made on the Skype for Business client will not be displayed on the
phone).

Using Better Together over Ethernet

This section provides instruction on how to use BToE on your phone and the Skype for Business
client.
BToE enables you to call Skype for Business contacts using your Skype for Business client while
providing you with high-quality audio through your phone. After BToE is enabled, you can
answer, place, hold and resume calls with your Skype for Business contacts on your phone and
the Skype for Business client on your PC simultaneously. What's more, your phone will be
locked once paired PC is locked or entering sleep mode.
Note
For MAC system, it does not support Using Better Together over Ethernet feature.
Placing BToE Calls
Do one of the following:
Select a contact or enter the phone number, and then press the Call soft key on your
-
phone.
Hover the mouse over the avatar of the contact, and then click
-
Business client.
Your phone and the client are in the calling state.
Answering BToE Calls
When you receive an incoming call, the incoming call information is displayed on your phone
and your Skype for Business client.
192
in your Skype for