Ending Calls; Call Mute; Call Hold/Resume - Yealink T46S Skype for Business User Manual

User Guide for the T46S Skype for Business phone

Ending Calls

To end a call:
Do one of the following:
If you are using the handset, press
-
- If you are using the headset, press
If you are using the speakerphone, press
-
Note
When a call is placed on hold, you cannot press
soft key
to resume the call, and then press

Call Mute

You can mute the microphone of the active audio device during an active call, and then the
other party cannot hear you. Call mute applies to all modes (Handset, Headset and
Speakerphone).
To mute a call:
Press
1.
The LCD screen indicates that the call is muted. The mute key LED glows red when the call
is muted.
To un-mute a call:
Press
1.

Call Hold/Resume

You can place an active call on hold. Only one active call can be in progress on the phone at
any time. Other calls can be made and received while placing the original call on hold. If Music
on Hold feature is enabled, the phone will play music to the callers who has been placed on
hold. For more information, please refer to
94
during an active call.
again to un-mute the call.
, the EndCall soft key or hang up the handset.
or the EndCall soft key.
or , or the EndCall soft key.
to end it. You should
to end it.
Music on Hold on page 95.
press the Resume