Signing Out Of A Cap Account; Branch Office Resiliency - Yealink T46S Skype for Business User Manual

User Guide for the T46S Skype for Business phone
The phone will sign into this CAP account automatically.
CAP Provisioning method is configurable via web user interface at the path:
Account->Register->CAP Provisioning.
Note
You can also sign into an
method. The phone will act as a CAP too. Contact y
account.

Signing Out of a CAP Account

To sign out of a CAP account:
Press Menu->Setting->Advanced (default password: admin or the lock PIN)->CAP Sign
1.
Out.
Press
2.
The LCD screen prompts "Are you sure to sign out?".
Press the OK soft key.
3.
The current CAP account will sign out.

Branch Office Resiliency

If you sign into the phone using On-Premises account, you can use branch office resiliency
feature. But the current Online environment does not support this feature.
Branch office resiliency is critical for multi-site deployments of Skype for Business where the
control servers are located at a central site or in data center. It allows branch site users to
continue to have Enterprise Voice service and voicemail (if voicemail rerouting settings are
configured) when the branch site loses the connection to the central site.
When the WAN connection between the branch site and central site is unavailable, the phone
goes into resiliency mode:
Branch site user on the phone stays in signed-in status with an indication of "Limited

service due to outage" and "Limit functionality" on the LCD screen.
180
individual
phone using a CAP account via the PIN Authentication
or the CAP sign out soft key.
our system administrator for the CAP