Troubleshooting Solutions; Ip Address Issues; The Ip Phone Does Not Get An Ip Address; Solving The Ip Conflict Problem - Yealink T5 Series Administrator's Manual

Troubleshooting Solutions

This section describes solutions to common issues that may occur while using the IP phone. Upon encountering a case
not listed in this section, contact your Yealink reseller for further support.
Topics

IP Address Issues

Time and Date Issues
Display Issues
Phone Book Issues
Audio Issues
Wi-Fi and Bluetooth Issues
Firmware and Upgrading Issues
System Log Issues
Password Issues
Logo Issues
Power and Startup Issues
Other Issues
IP Address Issues

The IP phone does not get an IP address

Do one of the following:
If your phone connects to the wired network:
Ensure that the Ethernet cable is plugged into the Internet port on the IP phone and the Ethernet cable is not loose.
l
Ensure that the Ethernet cable is not damaged.
l
Ensure that the IP address and related network parameters are set correctly.
l
Ensure that your network switch or hub is operational.
l
Ensure that the Wi-Fi feature is disabled.
l
If your phone connects to the wireless network:
If the network is secure, ensure the entered password is correct.
l
Ensure your gateway/router enables the wireless network feature.
l

Solving the IP conflict problem

Do one of the following:
Reset another available IP address for the IP phone.
l
Check network configuration via phone user interface at the path Settings->Advanced Settings (default password:
l
admin) ->Network->WAN Port->IPv4 (or IPv6). If the Static IP is selected, select DHCP instead.

Specific format in configuring IPv6 on Yealink phones

Scenario 1:
If the IP phone obtains the IPv6 address, the format of the URL to access the web user interface is "[IPv6 address]" or
"http(s)://[IPv6 address]". For example, if the IPv6 address of your phone is "fe80::204:13ff:fe30:10e", you can enter the
Troubleshooting Solutions
451