FUEL TANK AN D EXHAUST SYSTEMS 8-4
Fig. 4— Fuel Tank Mounting, C A , KA 10 Series
6. Lower tank until gauge unit wiring can be removed.
7. Remove fuel tank.
8. Install in the reverse order, being sure that the anti-
squeak material is replaced.
9. Lower vehicle and remove from hoist.
Fig. 5 — Fuel Tank, P 10 Series
P MODELS A N D 1 TON CHASSIS (FRAME)
MOUNTED TANKS (Figs. 6 and 7)
R e m oval and Installation
1. Drain tank.
2. Remove filler neck.
3. Disconnect gauge unit fuel line and wiring. Ignition
switch must be in OFF position.
4. Remove bolts attaching tank supports to frame.
5. Remove tank complete with mounting brackets and
support straps.
6. Remove tank from brackets and support straps, if
necessary.
7. To install, reverse the removal procedures. Re
place all anti-squeak material.
Fig. 7 — Fuel Tank N e c k and Meter, P 20, 30 Series
10-30 CHEVROLET TRUCK SERVICE MANUAL