Table 10-3: V/F Boardj; Table 10-4: V/F Boards - Teledyne 300M Instruction Manual

Teledyne API Model 300M CO Analyzer Instruction Manual, 04033, Rev. A
Table 10-3: V/F Board Jumpers - Factory Settings
Jumper
JP1
JP2
B12
B14
B15
Table 10-4: V/F Board Switch Settings - Ranges for Analog Output
Switch
S1 (Recorder Output)
S2 (DAS Output)
S3 (Test Output
S4 (Spare)
3. If voltages and jumper settings are correct, the V/F card is faulty and should be replaced.
The primary functions of the board can be divided into three areas:
1. Channels of Multiplexed Analog input to an Analog to Digital converter
2. Independent Digital to Analog converters
3. Digital I/O Lines configured as 24 outputs and 8 inputs
The following sections describe each of these functional areas.
Factory Set Jumpers
Setting
Set to match input
line frequency
100 mV
Full Scale
1, 6
1, 6
1, 6, 7
1, 6, 7
1-2
1-2
3-4
ON
User Set Switches
1 V
Full Scale
1, 5
1, 5
1, 5, 7
1, 5, 7
10-12
5 V 10 V
Full Scale Full Scale
1, 4 1, 3
1, 4 1, 3
1, 4, 7 1, 3, 7
1, 4, 7 1, 3, 7