Table of Contents
Advertisement
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d'alimentation
This will actuate the dispenser ten times. The portions must be collected and weighed. The total amount can
be entered and the portion size will be calculated automatically.
Cancel
All changes will be ignored.
Save
The updates will be saved. The current date will be filled in as the calibration date.
7.4.2 Calibration transponder
This screen is used to link a feed type to a transponder. This allows quick calibration without requiring user interaction on a
screen.
To add a calibration transponder, click Calibration Tag behind the feed type you wish to set it for. The next screen will open.
Enter the transponder number and click Save. When the transponder is held in front of the antenna the system will actuate the
dispenser ten times.
Note: if a transponder number is entered which is already assigned to an animal, an error notification will be dis-
played.
Index
Hanskamp AgroTech B.V. (the Netherlands)
42 - 68
www.hanskamp.nl/en
Spider
Advertisement
Table of Contents
