Table of Contents
Advertisement
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d'alimentation
3.2 Installation in FeedStation
1.
Check that all components are present according to the parts list at the
back of the manual.
2.
Find a location for the Spider near the feeding station (max. 10 m). The
location must be dry, easily accessible, and have a power supply (24VDC
PowerUnit). Once a suitable location has been found, the Spider can be
installed. Use the included mounting hardware to attach the unit's
mounting feet to the outside of the case. To attach the Spider to the feed-
ing station, use the case mounting plate (art. no.: 004-247-000). Install
the SpiderServer on one side and the PowerUnit (art. no.: 002-812-000)
on the other.
3.
Install the Hanskamp Antenna on the feed trough and run the cable to the
Spider unit. Ensure that it is out of reach of the animals. (fig. 1) see chap-
ter 3.2.2 for ear and leg recognition.
Caution: The antenna cable must not be shortened. Shorten-
ing the cable will negatively affect antenna performance.
4.
Connect the Hanskamp Antenna to the Spider PCB as illustrated in figure
The core is + and the sheath is -. (fig. 2).
All inputs and outputs are numbered, as is the cable entry plate (art. no.:
005-161-001) (fig. 3). Ensure that the holes line up with the inputs and
outputs to keep the cables uncluttered.
Example: 4 feeding stations with 4 feed types and a closing gate: (fig. 4)
Index
Hanskamp AgroTech B.V. (the Netherlands)
2
4
Please note! A black antenna is 120 Khz!
11 - 68
www.hanskamp.nl/en
Spider
1
3
Fs1
Fs2
Fs3
Fs4
Advertisement
Table of Contents
