Table of Contents
Advertisement
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d'alimentation
As is apparent in the above screen, the frequency has been changed from 128000 to 128000 Hz. This is evidently
the best frequency for the current configuration. An FDX tag type has been found (=2).
If no tag has been found, this will be reported and the old settings will be restored. You can try to read out the tag by
manually changing the SpiderPCB parameters. See chapter 4.3.6.
4.3.3 Set to default
Return all parameters to their default values
4.3.4 Restart SpiderPCB
To do this, go to: Settings>Controllers>select SpiderPCB>parameters>Restart SpiderPCB.
After confirmation, the SpiderPCB will start up and log on to the server again. Because the connection was lost, the Spi-
derPCB's LEDs will switch to orange. Once the connection is restored, the LEDs will light up blue again one by one. The
screen will automatically come back on when the SpiderPCB is restarted. If the page does not load, refresh the page.
4.3.5 LED test
All external LEDs on the Spider unit will be activated (visual test).
Index
Hanskamp AgroTech B.V. (the Netherlands)
24 - 68
www.hanskamp.nl/en
Spider
Advertisement
Table of Contents
