Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hanskamp Manuals
  4. Farm Equipment
  5. FeedStation 42000
  6. Installation and operating instruction

Hanskamp FeedStation 42000 Installation And Operating Instruction

Hide thumbs Also See for FeedStation 42000:

Advertisement

Quick Links

Download this manual
FeedStation 42000
Voerstation
Out of parlour feeder
Futterstation
Distribution alimentation con-
centré(DAC)
EN
Installation and operating instruction
Article number: 010-084-000
Date: January 2017
Doetinchem,
Version 3.5 - Translation of Original Instructions for use
The Netherlands
www.hanskamp.nl

Advertisement

loading
Need help?

Need help?

Do you have a question about the FeedStation 42000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hanskamp FeedStation 42000

Summary of Contents for Hanskamp FeedStation 42000

  • Page 1 FeedStation 42000 Voerstation Out of parlour feeder Futterstation Distribution alimentation con- centré(DAC) Installation and operating instruction Article number: 010-084-000 Date: January 2017 Doetinchem, Version 3.5 - Translation of Original Instructions for use The Netherlands www.hanskamp.nl...

  • Page 2: Manual Contents

    All information in this manual has been compiled with care. Hanskamp shall not be liable for errors or faults in this manual. The recommendations are meant to serve as guidelines. All instructions, pictures and specifications in this manual are based on the latest information that was available at the time of publication.
  • Page 3 The information in this manual is for farmers and technicians. • Dairy farmers use the information to test and adjust the FeedStation or to list overviews. • Technicians use the information to install and setup the FeedStation. 3 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 4 • Only use approved spare parts, and make sure they are only installed by author- ized technicians. 4 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 5 Before the electrical supply is attached to the FeedStation, make sure all parts are tight and that all the parts are in good condition. • Contact your nearest milking equipment dealer if you have any questions. 5 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 6 General safety messages appear in this safety messages section. Specific safety messages are in applicable parts of this manual when potential hazards may occur if the instructions or procedures are not followed. 6 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 7 Installation instruction General description The Hanskamp FeedStation is a universal feed station, with a modular setup, that has been developed to provide cows with their individual portions of concentrates. The FeedStation is fitted with PipeFeeder concentrate dosators and can be expand- ed to take up to four different types of feed (one PipeFeeder per feed type).
  • Page 8 Do not use any solvents or abrasives that could damage the safety stickers. • Replace missing or illegible safety stickers. • Safety stickers are obtainable from Hanskamp. Always specify the item numbers in correspondence. 001-703-000 8 - 17 Hanskamp AgroTech B.V. (the Netherlands)
  • Page 9 Insert the second frame between the side fences and attach this too using the mounting materials as used in step 3 (Fig. 7). Please note! Make sure the side fences and frames are fully levelled (vertically and horizontally). Then fix them into position. 9 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 10 FeedStation and prevent rotations or shifting of the cable guide. The cable which comes from the PipeFeed- er can be slided through this tube. Editing cable guide tube 001-769-000 Art. Nr.: 004-208-000 001-508-000 10 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 11 Make sure no water gets into the PipeFeeder as this can impair its functioning. • Make sure there is sufficient room between the PipeFeeders and the feed trough as this will stop the cow’s breath from condensing. 11 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 12 Please note! Calibrate the PipeFeeder feed dosator before use. Repeat this once a month or when changing feed type. Please note! Do not climb onto the feed station because of the danger of falling. 12 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 13 No part of this publication may be reproduced or made public without prior permission in writing from Hanskamp AgroTech BV. Although this publication was put together with the utmost care, Hanskamp AgroTech is not liable for any damage that might arise due to errors or gaps in this publication.
  • Page 14 FeedStation 42000 Annex 1 Hanskamp can supply the following options for the FeedStation concentrates box : 27000 PipeFeeder concentrate feed dosator 28000 PipeFeeder low capacity dosator 004-030-000 Universal L’port closing gate 002-400-000 PowerDos pneumatic powder and minerals dosator 35000/36000 MultiDos liquid concentrate dosator...
  • Page 15 Annex 2 Loose components It is possible to reorder loose components from your supplier for maintenance, or for any other reason. When doing so, please use the item numbers shown below in the drawing. 15 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 16 Description Number Visit us on: 001-376-000 Seal bag 150x200 mm 001-741-000 Bolt M8x55 a2 DIN 933 001-774-000 washer M8 DIN 9021 a2 001-796-000 screw DIN 7504 K A2 4,8x16 (for lid) 16 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...
  • Page 17 FeedStation 42000 Hanskamp AgroTech B.V. Broekstraat 17 7009 ZB Doetinchem The Netherlands Tel: +31 (0)314 - 393 797 Fax: +31 (0)314 - 393 826 www.hanskamp.nl 17 - 17 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en...