Table of Contents
Advertisement
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d'alimentation
7.5.3.3 Advanced:
Only accessible by using the admin login. (see chapter 4.5.2.1)
Caution: After signing in it is possible to make changes which can seriously damage the system. Continue feeding in
the milking parlour when a transponder is not detected.
Continue feeding in the milking parlour when a transponder is not detected.
Use this option if there is an excess of leftover feed in the milking parlour resulting from poor tag identification (e.g. the tag
remains outside the antenna field for too long). If the option is not used, the feed will be distributed throughout the milking
period. If the tag is not detected often enough, the intervals between the portions at the end of the milking period will become
shorter to ensure that the feeding is completed during the milking period.
Effect:
On - The milking time begins when the cow is first recognised. The rations are distributed evenly throughout the set time.
Off - The rations are distributed as soon as the cow is recognised. This can result in residual feed because the cow does not
consume everything within the milking time.
Index
Hanskamp AgroTech B.V. (the Netherlands)
52 - 68
www.hanskamp.nl/en
Spider
Advertisement
Table of Contents
