Table of Contents
Advertisement
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d'alimentation
6. Using the LED indicators
The unit uses 16 RGB LEDS to indicate the Spider's current process.
The following is an overview of the various colours and their meanings.
Orange:
No Communication with processor. This happens on the
first start up. The Spider will establish its own network.
Light blue, crossfaded: Stand by (waiting for next animal).
Blue, flashing:
Animal is feeding + indication of number of feed types.
Example: 4 feeding stations with 4 feed types, if feeding
station 1 is feeding and this animal is receiving 3 feed
types, the first LEDs will flash blue.
Green, flashing:
Feed motor is in operation; the LED which matches the
dispenser being operated will light up.
Yellow, crossfaded: Waiting for animal to exit feeding station; this happens
when the animal has no more feed credit or has not been recognised for a while.
Yellow, continuous: (Only applicable in milking parlour) If the limit switch is activated continuously, the yellow LED will remain
lit up. Antenna recognition will remain inactive until the limit switch returns to the normal position.
Red, continuous:
Motor error; this happens when the motor current is too high (±3A) or is not giving feedback. If the motor
responds normally the next time it is actuated, the error will disappear and this LED will no longer light up
red. If a motor error occurs 3 times in a row (no feedback/overcurrent), the motor will be disabled for 10
minutes. After 10 minutes, the motor can be actuated again; if the error is gone, the LED will light up
green again. For exact error reporting, see Feed overview in the user interface.
RFID Leds
Chapter 4.3.6
Red:
Multiplexing (on = antenna active).
Green:
Tag detected.
Index
Hanskamp AgroTech B.V. (the Netherlands)
27 - 68
www.hanskamp.nl/en
FEEDER / ANT 1
1
5
9
2
6
10
3
7
11
4
8
12
Spider
13
14
15
16
Advertisement
Table of Contents
