Table of Contents
Advertisement
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d'alimentation
7.4 Calibration
This screen is used to calibrate the connected dispensers.
Dispensers:
Calibration transponders: overview of the connected transponders for the feed types
7.4.1 Dispensers
SpiderPCB
Connected
Feeding station
Dispenser no.
Silo-Feed type
Ration size
Calibration date
This displays the calibration screen for the relevant dispenser.
Note: Only connected dispensers can be calibrated.
7.4.1.1 Calibration screen:
From this screen you can start up the dispenser for calibration and enter the weight. The total calibration amount
and portion size are linked.
Note: the weight must be entered in grams.
Index
Hanskamp AgroTech B.V. (the Netherlands)
overview of the connected dispensers
Address of the SpiderPCB (Spider PCB) and name
Indication whether the SpiderPCB is connected to the processor
Name of the connected feeding station
Number of the connected feeding station
Silo to which the dispenser is connected
Current ration size
Date of last calibration
www.hanskamp.nl/en
41 - 68
Spider
Advertisement
Table of Contents
