Symbols - Danfoss VLT FC 102 Operating Instructions Manual

1 How to Read these Operating Instructions
1.1.3 Software Version and Approvals: VLT HVAC Drive
1
This manual can be used with all VLT HVAC Low Harmonic Drive frequency converters with software version 3.2.x.
The software version number can be seen from par. 15-43
NB!
The Low Harmonic Drive has two LCPs, one for the frequency converter (to the right) and one for the active filter (to the left). Each
LCP controls only the unit it is connected to and there is no communication between he two LCPs.

1.1.4 Symbols

Symbols used in these Operating Instructions.
NB!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
*
Indicates default setting
6
VLT HVAC Low Harmonic Drive Operating In-
VLT HVAC Drive
Software version: 3.2.x
Software Version .
®
MG.16.A1.02 - VLT is a registered Danfoss trademark
structions