Danfoss VLT FC 102 Operating Instructions Manual page 90

6 How to Programme the Low Harmonic Drive
4-11 Motor Speed Low Limit [RPM]
Range:
Application [Application dependant]
dependent*
3-11 Jog Speed [Hz]
Range:
Application [Application dependant]
dependent*
Application [Application dependant]
dependent*
6
90
Function:
Enter the minimum limit for motor speed. The Motor Speed Low Limit can be set to correspond to
the manufacturer's recommended minimum motor speed. The Motor Speed Low Limit must not
Motor Speed High Limit [RPM] .
exceed the setting in par. 4-13
Function:
The jog speed is a fixed output speed at which the frequency converter is running when the jog
function is activated.
Jog Ramp Time .
See also par. 3-80
®
MG.16.A1.02 - VLT is a registered Danfoss trademark
VLT HVAC Low Harmonic Drive Operating In-
structions