Danfoss VLT FC 102 Operating Instructions Manual page 79

VLT HVAC Low Harmonic Drive Operating In-
structions
4. Open the appropriate file
5. Choose "Write to drive"
All parameter settings are now transferred to the frequency converter.
A separate manual for MCT 10 Set-up Software is available
The MCT 10 Set-up software modules
The following modules are included in the software package:
Ordering number:
Please order the CD containing MCT 10 Set-up Software using code number 130B1000.
MCT 10 can also be downloaded from the Danfoss Internet:
: MG.10.Rx.yy .
MCT Set-up 10 Software
Setting parameters
Copy to and from frequency converters
Documentation and print out of parameter settings incl. diagrams
Ext. user interface
Preventive Maintenance Schedule
Clock settings
Timed Action Programming
Smart Logic Controller Set-up
WWW.DANFOSS.COM, Business Area: Motion Controls .
®
MG.16.A1.02 - VLT is a registered Danfoss trademark
5 How to Operate the Low Harmonic Drive
5
79