Read-Only Module Parameters - Festo MSE6-C2M Manual

Parameter
9.3

Read-only module parameters

Module parameter: Module time of operation [Module time of operation]
Function no. 4828 + m * 64 + 29 (low byte)
4828 + m * 64 + 30 (high byte)
Description Operating time of the function module in hours.
The operating time is the duration for which the module was supplied with electric-
al energy.
Values Unsigned binary number with the decimal value range:
0 65535 Hours (low byte + 256 * high byte)
...
Comment The operating time is limited to a maximum value of 65535.
The operating hours counter is increased by 1 each time the operating voltage is
switched on and then when each additional hour elapses.
If the operation takes place more often than 65535 times, the parameter remains at
this value.
This parameter can only be read.
Tab. 58 Module parameter "Module time of operation"
Module parameter: Shut-off valve switching cycles [Shut off valve cycles]
Function no. 4828 + m * 64 + 31 (low byte)
4828 + m * 64 + 32 (high byte)
Description Counts the switching cycles of the shut-off valve.
Values Unsigned binary number with the decimal value range:
0 65535 Cycles (Low Byte + 256 * high byte)
...
Comment The switching cycles counter is limited to a maximum value of 65535.
If the operation takes place more often than 65535 times, the parameter remains at
this value.
This parameter can only be read.
Tab. 59 Module parameter "Shut-off valve cycles"
72
m = module number
m = module number
Festo — MSE6-C2M — 2019-03