Output Word Am.0 "Module Control" [Modul Control] - Festo MSE6-C2M Manual

Input/output data
8.2.1

Output word Am.0 "Module control" [Modul control]

Output word Am.0 is used to control the pressure regulation and blocking function as well as the con-
sumption measurement.
Data format of output word "16 bits, right-justified"
D15 D14 D13 D12 D11 D10 D9
B15 B14 B13 B12
MSB
Abbreviations used
B0 Shut-off valve controller
B1 Auto-user controller
B2 Q_low-Timer-Reset
B3, B4 Selection of user target pressure
B5 Auto enable controller
B6 Electrical controller output 0
B7 Electrical controller output 1
B12 Consumption V0 Run
B13 Consumption V0 Reset
B14 Consumption V1 Run
B15 Consumption V1 Reset
––
Reserved data bits
D0 D15 16 bit output data field
...
MSB/LSB Most significant bit /least significant bit
Tab. 15 Data format of output word Am.0
Output data, pressure regulation and blocking function
Data bit B0 has the following values:
– 0 = open shut-off valve - (pressurisation state, default)
– 1 = closed shut-off valve (blocking state)
Data bit B1 has the following values:
– 0 = operating mode "User-controlled pressure regulation and blocking function" active (default)
– 1 = operating mode "Automatic pressure regulation and blocking function" active
Data bit B2 has the following values:
– 0 = no change in status of the Q_low-Timers (default)
– 1 = Resetting the Q_low-Timers
42
D8
– – – –
D7 D6 D5 D4
B7 B6 B5 B4
Festo — MSE6-C2M — 2019-03
D3 D2 D1 D0
B3 B2 B1 B0
LSB