Configuring The Surveyor Pda Plus Detector In Xcalibur - Thermo Scientific Surveyor PDA Plus Hardware Manual

3
Configuration

Configuring the Surveyor PDA Plus Detector in Xcalibur

Configuring the Surveyor PDA Plus Detector in Xcalibur
24 Surveyor PDA Plus Detector Hardware Manual
Before you can control the PDA detector from the Xcalibur data system, you must add it to
the configured devices list and configure its stack number. The Instrument Configuration
application lists the devices installed with the Xcalibur data system.
 To configure your instrument in Xcalibur
1. Open the Instrument Configuration dialog box by doing one of the following:
• For Xcalibur 2.0.x or lower, from the computer desktop, choose Start > All
Programs > Xcalibur > Instrument Configuration, or double-click the Instrument
Configuration icon.
The Instrument Configuration dialog box appears (see
• For Xcalibur 2.1, from the computer desktop, choose Start > All Programs >
Thermo Foundation x.x > Instrument Configuration, where x.x is the installed
version of Thermo Foundation.
The Thermo Foundation Instrument Configuration dialog box appears (see
Figure 20).
Figure 19. Instrument Configuration dialog box with configured devices
Figure 19).
Thermo Scientific