ChromQuest Diagnostics for the PDA Detector
Calibrating the Detector with ChromQuest
Thermo Scientific
The diagnostics program lets you check the operation of the PDA detector, calibrate the PDA
detector, and view the error log. To perform diagnostics from ChromQuest, your PDA
detector must be connected to the data system computer, configured as part of an instrument
in the ChromQuest Enterprise, and powered on. For information on configuring your
Surveyor PDA Plus Detector, see
ChromQuest"
on
page
26.
Contents
•
Calibrating the Detector with ChromQuest
•
Displaying, Printing, and Clearing the Error Log
•
Verifying Operational Performance
•
Controlling the Lamps with ChromQuest
•
Adjusting the Light Output from the Lamps
•
Checking the Firmware Version
To calibrate the PDA detector from the ChromQuest data system, prepare the detector as
described in the first topic of this section, and then perform a wavelength calibration, array
calibration, or both.
•
Preparing the Detector for Calibration
•
Performing a Wavelength Calibration
•
Performing an Array Calibration
"Configuring the Surveyor PDA Plus Detector in
Surveyor PDA Plus Detector Hardware Manual
5
63