Table of Contents
Advertisement
3 Configuring the server
3.1.3 Password
From the User Security menu choice, you can set, change, and delete a power-on password
and an administrator password. The User Security choice is on the full Setup utility menu
only.
If you set only a power-on password, you must type the power-on password to complete the
system startup and to have access to the full Setup utility menu.
An administrator password is intended to be used by a system administrator; it limits access to
the full Setup utility menu. If you set only an administrator password, you do not have to type
a password to complete the system startup, but you must type the administrator password to
access the Setup utility menu.
If you set a power-on password for a user and an administrator password for a system
administrator, you can type either password to complete the system startup. A system
administrator who types the administrator password has access to the full Setup utility menu;
the system administrator can give the user authority to set, change, and delete the power-on
password. A user who types the power-on password has access to only the limited Setup
utility menu; the user can set, change, and delete the power-on password, if the system
administrator has given the user that authority.
Power-on password
If a power-on password is set, when you turn on the server, you must type the power-on
password to complete the system startup. You can use any combination of up to seven
characters (A - Z, a - z, and 0 - 9) for the password.
3-6
−
Clear Power-on Password
Select this choice to clear a power-on password.
−
Set Administrator Password
Select this choice to set or change an administrator password. An administrator
password is intended to be used by a system administrator; it limits access to the full
Setup utility menu. If an administrator password is set, the full Setup utility menu is
available only if you type the administrator password at the password prompt. For
more information, see "Administrator password".
−
Clear Administrator Password
Select this choice to clear an administrator password.
Save Settings
Select this choice to save the changes that you have made in the settings.
Restore Settings
Select this choice to cancel the changes that you have made in the settings and restore the
previous settings.
Load Default Settings
Select this choice to cancel the changes that you have made in the settings and restore the
factory settings.
Exit Setup
Select this choice to exit from the Setup utility. If you have not saved the changes that
you have made in the settings, you are asked whether you want to save the changes or
exit without saving them.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Tecal RH5485 Server
Installation and User's Guide
Issue 02 (2011-05-25)
Advertisement
Table of Contents
