Removing The Bezel; Installing A Pci Express Adapter; Figure 2-16 Removing The Bezel - Huawei Tecal RH5485 Installation And User Manual

Tecal RH5485 Server
Installation and User's Guide

2.7 Removing the bezel

Figure 2-16 Removing the bezel

To remove the bezel, complete the following steps:
1. Read t h e Tecal RH5485 Safety Information
2. Press on the bezel retention tabs on the sides of the bezel and pull the bezel away from
the server.

2.8 Installing a PCI Express adapter

The following notes describe the types of adapters that the server supports and other
information that you must consider when you install an adapter:





Issue 02 (2011-05-25)
NOTE
You do not have to remove the top cover before you remove the bezel.
An Emulex 10 GbE Custom Adapter for System x comes installed in PCI Express slot 7
in some models.
Locate the documentation that comes with the adapter and follow those instructions in
addition to the instructions in this section. If you must change the switch setting or
jumper settings on the adapter, follow the instructions that come with the adapter.
Avoid touching the components and gold-edge connectors on the adapter.
If you are installing a ServeRAID adapter with a battery installed on the adapter, you
must install the adapter in a full length expansion slot and you must leave an empty
expansion slot next to the slot in which you install the ServeRAID adapter.
The server scans devices and PCI Express slots to assign system resources in the
following order: ICH10 RAID, DVD, USB, I/O Hub 1, integrated Ethernet controller,
integrated SAS controller, PCI Express slots 5 through 7, I/O Hub 2, and then PCI
Express slots 1 through 4. If you have not changed the default startup sequence, the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
2 Installing optional devices
2-19