2 Installing optional devices
Figure 2-36 Install the memory card
If you have other devices to install or remove, do so now. Otherwise, go to"Completing the
installation".
2.17 Installing a microprocessor
The following notes describe the type of microprocessor that the server supports and other
information that you must consider when you install a microprocessor:
2-44
a. If this is a new memory card, remove the memory card filler from the server.
b. Insert the memory card into the memory-card connector.
c. Press the memory card into the connector and close the release levers. d. Slide the
blue release latch to the locked position.
The optional microprocessors that HUAWEI supports are limited by the capacity and
capability of the server. Any microprocessors that you install must have the same
specifications as the microprocessors that came with the server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Tecal RH5485 Server
Installation and User's Guide
Issue 02 (2011-05-25)