Removing The Top-Cover Bracket; Figure 2-14 Slide The Blue Latches - Huawei Tecal RH5485 Installation And User Manual

Tecal RH5485 Server
Installation and User's Guide

2.5 Removing the top-cover bracket

To remove the top-cover bracket, complete the following steps:
1. Read t h e Tecal RH5485 Safety Information.
2. If you are installing or replacing a non-hot-swap component, turn off the server and all
peripheral devices, and disconnect the power cords and all external cables.
3. Slide t h e server out of the rack until the slide rails lock into place.
4. Remove the top cover (see "Removing the top cover").
5. Slide the blue latches on the top-cover bracket toward the center of the server.

Figure 2-14 Slide the blue latches

6. Tilt and lift the top-cover bracket out of the server.
7. If you are instructed to return the top-cover bracket, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Issue 02 (2011-05-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
2 Installing optional devices
2-17