3 Configuring the server
3.1 Using the Setup utility
Use the Setup utility, to perform the following tasks:
3.1.1 Starting the Setup utility
To start the Setup utility, complete the following steps:
1. Turn on the server.
2. When the prompt <F1> Setup is displayed, press F1. If you have set an administrator
password, you must type the administrator password to access the full Setup utility menu. If
you do not type the administrator password, a limited Setup utility menu is available.
3. Select the settings to view or change.
3.1.2 Setup utility menu choices
The following choices are on the Setup utility main menu. Depending on the version of the
server firmware, some menu choices might differ slightly from these descriptions.
3-2
The blue-screen capture feature captures the video display contents before the IMM
restarts the server when the IMM detects an operating-system hang condition. A system
administrator can use the blue-screen capture feature to assist in determining the cause of
the hang condition.
For more information, see "Using the remote presence and blue-screen capture features".
Ethernet controller configuration
For information about configuring the Ethernet controller, see "Configuring the
Broadcom Gigabit Ethernet controller" .
View configuration information
View and change assignments for devices and I/O ports
Set the date and time
Set and change passwords
Set the startup characteristics of the server and the order of startup devices
Set and change settings for advanced hardware features
View, set, and change settings for power-management features
View and clear error logs
Resolve configuration conflicts
NOTE
Approximately 3 minutes after the server is connected to ac power, the power-control button becomes
active.
System Information
Select this choice to view information about the server. When you make changes through
other choices in the Setup utility, some of those changes are reflected in the system
information; you cannot change settings directly in the system information.
This choice is on the full Setup utility menu only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Tecal RH5485 Server
Installation and User's Guide
Issue 02 (2011-05-25)