2 Installing optional devices
Figure 2-34 Remove the server top cover
4. If you are installing DIMMs in a memory card that is already installed in the server,
remove the memory card:
5. Place a memory card on a flat, static-protective surface, with the DIMM connectors
facing up.
To avoid breaking the DIMM retaining clips or damaging the DIMM connectors, open and
close the clips gently.
6. Open the retaining clips 1 on each end of the DIMM connector.
2-42
a. Slide the blue release latch to the unlocked position.
b. Open the release levers on the top of the memory card.
c. While you hold the release levers open, lift the memory card out of the server.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Tecal RH5485 Server
Installation and User's Guide
Issue 02 (2011-05-25)