2 Installing optional devices
Figure 2-33 LEDs on the memory card
Memory card/DIMM error LED: When this LED is lit, it indicates that the memory card or
a DIMM has failed.
Memory card only error LED: When this LED is lit, it indicates that the memory card has
failed.
DIMM 1 - 8 error LED: When one of these LEDs is lit, it indicates that a DIMM has failed.
Light path diagnostics button power LED: When this LED is lit, it indicates that the
capacitor has power and error LEDs can be lit as necessary.
Light path diagnostics button: Press this button to relight the error LED that had previously
been lit.
Installing a memory card
At least one memory card with one pair of DIMMs must be installed for the server to operate
correctly.
To install a memory card, complete the following steps:
1. Read t h e Tecal RH5485 Safety Information.
2-40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Tecal RH5485 Server
Installation and User's Guide
Issue 02 (2011-05-25)