Figure 2-35 Insert The Dimm Into The Connector - Huawei Tecal RH5485 Installation And User Manual

Tecal RH5485 Server
Installation and User's Guide
7. Touch the static-protective package that contains the DIMM to any unpainted metal
surface on the outside of the server; then, remove the DIMM from the package.
8. Turn the DIMM so that the DIMM keys align correctly with the slot.

Figure 2-35 Insert the DIMM into the connector

9. Insert the DIMM into the connector by aligning the edges of the DIMM with the slots at
the ends of the DIMM connector. Firmly press the DIMM straight down into the connector
2 by applying pressure on both ends of the DIMM simultaneously. The retaining clips snap
into the locked position when the DIMM is seated in the connector.
10. Install the memory card.
Issue 02 (2011-05-25)
NOTE
If there is a gap between the DIMM and the retaining clips, the DIMM has not been correctly inserted;
open the retaining clips, remove the DIMM, and then reinsert it.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
2 Installing optional devices
2-43