Figure 2-17 Push The Adapter Retention Latch - Huawei Tecal RH5485 Installation And User Manual

Hide thumbs Also See for Tecal RH5485:

Table of Contents

Tecal RH5485 Server

Installation and User's Guide

Figure 2-17 Push the adapter retention latch

5. Push the adapter retention latch toward the rear of the server and open the tab.

6. Remove the expansion-slot cover.

When you install an adapter, avoid touching the components and gold-edge connectors on the

adapter. Make sure that the adapter is correctly seated in the connector. Incorrectly seated

adapters might cause damage to the I/O board or to the adapter.

7. Touch the static-protective package that contains the adapter to any unpainted surface on

the outside of the server; then, grasp the adapter by the top edge or upper corners of the

adapter and remove it from the package.

8. Carefully grasp the adapter by its top edge or upper corners, and align it with the

connector on the I/O board.

9. Press the adapter firmly into the adapter connector.

10. Push down on the blue adapter retention latch until it clicks into place, securing the

adapter.

11. Connect any required cables to the adapter.

If you have other devices to install or remove, do so now. Otherwise, go to"Completing the

installation".

Issue 02 (2011-05-25)

CAUTION

Huawei Proprietary and Confidential

2 Installing optional devices

2-21

Table of Contents