Table of Contents
Advertisement
Tecal RH5485 Server
Installation and User's Guide
Issue 02 (2011-05-25)
- Network
Select this choice to view or configure optional network devices, such as iSCSI,
PXE, and network devices. There might be additional configuration choices for
optional network devices that are compliant with UEFI 2.1 and later.
Date and Time
Select this choice to set the date and time in the server, in 24-hour format
(hour:minute:second).
This choice is on the full Setup utility menu only.
Start Options
Select this choice to view or change the start options, including the startup sequence,
keyboard NumLock state, PXE boot option, and PCI device boot priority. Changes in the
startup options take effect when you restart the server.
The startup sequence specifies the order in which the server checks devices to find a boot
record. The server starts from the first boot record that it finds. If the server has Wake on
LAN hardware and software and the operating system supports Wake on LAN functions,
you can specify a startup sequence for the Wake on LAN functions. For example, you
can define a startup sequence that checks for a disc in the CD-RW/DVD drive, then
checks the hard disk drive, and then checks a network adapter.
This choice is on the full Setup utility menu only.
Boot Manager
Select this choice to view, add, or change the device boot priority, boot from a file, select
a one-time boot, or reset the boot order to the default setting.
System Event Logs
Select this choice to access the System Event Manager, where you can view thePOST
event log and the system-event log.
The POST event log contains the three most recent error codes and messages that were
generated during POST.
The system-event log contains POST and system management interrupt (SMI) events
and all events that are generated by the baseboard management controller that is
embedded in the integrated management module.
Important: If the system-error LED on the front of the server is lit but there are no other
error indications, clear the system-event log. Also, after you complete a repair or correct
an error, clear the system-event log to turn off the system-error LED on the front of the
server.
−
POST Event Viewer
Select this choice to access the POST event viewer to view the POST event log.
−
System Event Log
Select this choice to view the system-event log.
−
Clear System Event Log
Select this choice to clear the system-event log.
User Security
Select this choice to set, change, or clear passwords. For information about passwords,
see "Passwords".
This choice is on the full and limited Setup utility menu.
−
Set Power-on Password
Select this choice to set or change a power-on password. For more information, see
"Power-on password" on.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3 Configuring the server
3-5
Advertisement
Table of Contents
