Setup Utility Menu Choices - Huawei Tecal RH5485 Problem Determination And Service Manual

Tecal RH5485 Server
Problem Determination and Service Guide


6.2.1 Setup utility menu choices

The following choices are on the Setup utility main menu. Depending on the version of the
HUAWEI Tecal Server Firmware (server firmware), some menu choices might differ slightly
from these descriptions.


Issue 02 (2011-05-25)
administrator can use the blue-screen capture feature to assist in determining the cause
of the hang condition.
For more information, see "Using the remote presence capability and blue-screen
capture".
Ethernet controller configuration
For information about configuring the Ethernet controller, see "Configuring the
Broadcom Gigabit Ethernet controller".
System Information
Select this choice to view information about the server. When you make changes
through other choices in the Setup utility, some of those changes are reflected in the
system information; you cannot change settings directly in the system information.
This choice is on the full Setup utility menu only.
− System Summary
Select this choice to view configuration information, including the ID, speed, and
cache size of the microprocessors; machine type and model of the server; the serial
number; the system UUID; and the amount of installed memory. When you make
configuration changes through other choices in the Setup utility, the changes are
reflected in the system summary; you cannot change settings directly in the system
summary.
− Product Data
Select this choice to view the system-board identifier and the revision level or issue
date of the server firmware, integrated management module, and diagnostics code.
System Settings
Select this choice to view or change the server component settings. This choice is on the
full Setup utility menu only.
− Adapters and UEFI Drivers
Select this choice to view information about the adapters and device drivers in the
server that are compliant with EFI 1.10 and UEFI 2.0.
− Processors
Select this choice to view or change the processor settings.
− Memory
Select this choice to view or change the memory settings. To configure memory
mirroring, select System Settings > Memory > Memory Mirroring Mode >
Mirrored.
− Devices and I/O Ports
Select this choice to view or change assignments for devices and input/output (I/O)
ports. You can configure the serial ports; configure remote console redirection;
enable or disable integrated Ethernet controllers, the SAS/SATA controller, SATA
optical drive channels, and PCI slots; and view the system Ethernet MAC addresses.
If you disable a device, it cannot be configured, and the operating system will not be
able to detect it (this is equivalent to disconnecting the device).
− Power
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Configuration information and instructions
6-3