Mode 11: Agent Release, Single Hazard, Cross-Zoned, Combined Release; Zone Configuration; Hazard Configuration; Nac Configuration - Mircom FR-320 Series Installation And Operation Manual

12.11 Mode 11: Agent Release, Single Hazard, Cross-zoned,
Combined Release
Out1 Signal Steady
Out2 Signal Escalating
Out3 Rel. Releasing
Out4 Rel. Releasing
RLS TMR 1 Started
RLS Tmr 1 Interrupted
RLS Tmr 1 Cancelled
RLS Tmr 2 Started
RLS Tmr 2 Interrupted
RLS Tmr 2 Cancelled

12.11.1 Zone Configuration

• Detection Zone -1: Alarm (Hazard Area1, cross-zoned)
• Detection Zone -2: Alarm (Hazard Area1, cross-zoned)
• Detection Zone -3: Alarm (Pressure Switch or Water-flow)
• Detection Zone -4: Supervisory (Default non-latching)
• Detection Zone -5: Abort Switch
• Detection Zone -6: Manual Release
• NAC -1: Signal, indicate the Hazard Area1 status.
• NAC -2: Signal, indicate the Hazard Area1 status.
• RAC -1: Releasing Circuit
• RAC -2: Releasing Circuit

12.11.2 Hazard Configuration

• Default Release Timer Value:
• Default Manual Release Delay: 0 seconds
• Default Abort Delay Type:
• Soak Timer Value:

12.11.3 NAC Configuration

• Default Escalating NAC code of Hazard Area State:
•
•
•
•
• Default NAC code of supervisory is 20 BPM
88
Detection Zones
Z1 Z2 Z3
Alm Alm WF
X
Hazard Idle: Off
Hazard Alert: Steady
Hazard Alarm: 60BPM
Hazard Release: Steady
Phantom Zones
Z4 Z5 Z6 Zp1
Supv AB MR Z1+Z2
X
(X) X X
X
X
X
X
X
60 seconds
Standard UL.
0 seconds (continuous)
Pre-Programmed Modes
Release Timers
RT1
RT2
Zp2
Exp
Exp
Z3+Z4
X
X