Clear Event Log (Command-Menu); Dialer Config (Command-Menu) - Mircom FR-320 Series Installation And Operation Manual

10.9

6. Clear Event Log (Command-Menu)

i
Note:
-Select Log-
1. Alarm Log
2. General Log
3. All Logs
Select the type of log to clear. Press the
"ENTER" key. The system will then
confirm before clearing logs.
Clear all the
Selected log(s)? Y
Press the "ENTER" key to confirm or the
"CANCEL" key to cancel the operation.
Log(s) cleared

10.10 7. Dialer Config (Command-Menu)

i
Note:
The following illustration shows the dialer configuration menu. This menu will show up only if
there is a built-in dialer on the main board. Each item in this menu is described below in detail.
-Dialer Config-
1. Account Info
2. Telephone line
3. Report Options
4. Time Parameter
5. Enable/Disable
Refer to 10.3 How to Use the Keypad to Program the FR-320 on page 49 for
detailed instructions on making menu selections.
Use this function to clear alarm logs, event logs, or both.
Refer to 10.3 How to Use the Keypad to Program the FR-320 on page 49 for
detailed instructions on making menu selections.
Configuration
59