How To Use The Keypad To Program The; Table 9 Access Levels - Mircom FR-320 Series Installation And Operation Manual

When the user presses "MENU" and enters the password, they should enter the password of
the level intended. If the user is in a lower level of access, attempts to operate functions
requiring a higher level of access will be refused. The three levels of access are defined in
Table 9.

Table 9 Access Levels

Access Level
Level 0 - Command
Level 1 - Configuration
Level 2 - Factory
10.3 How to Use the Keypad to Program the FR-320
1. Press
2. Enter your password, then press
3. Select a Command Menu option by pressing
display.
4. Use the up and down arrow buttons to scroll through the submenu.
5. Press
6. Use the left or right arrow buttons to select/unselect an option (selected = "X"). Use the
up and down arrows to scroll through the different menu options. When entering
numerical data, use the up and down arrows to increase or decrease the number.
7. Once you have made the correct selection, press
display will return to the submenu screen.
8. Press
Enter passcode:
_
Description
The default password is for this level "1111" without quotes. In this level the
user can only perform regular testing and operation.
The default password is for this level "2222" without quotes. User can
change configuration and have access to command level.
Currently not used.
M
(Menu button). You will be prompted to enter your password.
to select a submenu option.
X (Cancel button) to return to the previous menu.
(Enter button) to continue.
. The corresponding submenu will
to confirm the change. The
Configuration
49