Report Printouts - DANIEL 2500 User's Reference Manual

______________________________________________________ MODEL ______________________________________________________

REPORT PRINTOUTS

Reports are normally printed on a serial printer connected to a RS-232 port on the
MODEL 2500.
A report printout can be initiated by using four different methods. They are:
- Automatically by including a report command statement on a
Calculation Entry Sheet in the configuration program
- Operator command from the front panel
- Remote terminal or computer attached to the REPORTS serial port
- MODBUS communications link
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
120
MODEL 2500 2500
SECTION 7 7 SECTION