Displaying A Live Value When The Variable Has Been Manually Overridden - DANIEL 2500 User's Reference Manual

MODEL 2500_______________________________________________________ MODEL 2500_______________________________________________________
DISPLAYING A LIVE VALUE WHEN THE VARIABLE HAS BEEN
MANUALLY OVERRIDDEN
The steps involved in displaying a LIVE value on the MODEL 2500 LCD screen
when the variable has been manually overridden are as follows:
- Begin with the following illustrated display screen message.
- Press the ENTER key to monitor the LIVE value of the variable, and
then press the DOWN arrow key to change to the following illustrated
display screen.
This display is useful when instruments are being serviced, because
the value displayed is unaffected by manual override. This means that
the actual value of a variable can be monitored during system
calibration or troubleshooting procedures even though the live value
has been manually overridden, and an operator-entered value is being
used for calculations.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SECTION 6 6 SECTION
30. DEGF
C3TEMP MANUAL
C3TEMP LIVE
20.0 DEGF
93