Selecting A Table Row - DANIEL 2500 User's Reference Manual

MODEL 2500_______________________________________________________ MODEL 2500_______________________________________________________
As shown in the following illustrated table, rows are numbered from top to
bottom, and columns are numbered from left to right.

SELECTING A TABLE ROW

After the desired table, TABLE 18, has been accessed and an initial row and
column has been indicated, different table rows can be accessed. The steps for
gaining access to different table rows are as follows:
Begin with the newly accessed table screen displayed below with its initial
row and column designations.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SECTION 6 6 SECTION
TABLE 18
BETA 0.100
BETA 0.125
BETA 0.150
BETA 0.175
BETA 0.200
BETA 0.225
BETA 0.250
BETA 0.275
BETA 0.300
BETA 0.325
TABLE 18
BETA
TAPTYPE
1 2
0.607 0.604
0.608 0.604
0.611 0.604
0.614 0.604
0.618 0.604
0.623 0.605
0.628 0.605
0.634 0.606
0.641 0.606
0.650 0.607
5 / 1
0.200
109