DANIEL 2500 User's Reference Manual page 41

MODEL 2500_______________________________________________________ MODEL 2500_______________________________________________________
As indicated in the screen below, this causes a COMMID number screen to be
overlaid in a window beneath the COMMID option window at the top of the
screen.
The default COMMID number is 1, but a communications identification number
from 1 through 247 may be assigned. However, if an active program is resident in
the user's Model 2500, the number assigned must match the COMMID number as
indicated in the System Command Menu.
14. When changing the COMMID number, the user must type in the number
assigned and press the ENTER key.
The following rules apply when changing the COMMID number:
- Do not place a "0" in front of one or two digit numbers.
- Delete mistakes by using the delete function or by typing over the
error.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SECTION 3 3 SECTION
27