Locating A Data Table - DANIEL 2500 User's Reference Manual

MODEL 2500_______________________________________________________ MODEL 2500_______________________________________________________

LOCATING A DATA TABLE

Data tables are located and entered from the TABLES sub-menu located on the
MAIN MENU. To display and enter table data from TABLE 18, the table must
first be located.
The steps for locating the TABLES sub-menu are as follows:
Begin with the following illustrated display screen, which shows the first
menu selection on the MAIN MENU, and indicates that the MAIN MENU
is active:
Press the DOWN arrow key to move to the second selection on the MAIN
MENU and display the OUTPUT CHANNELS sub-menu as illustrated in the
following display screen.
Press the DOWN arrow key to move to the third selection on the MAIN
MENU and display the ALARMS sub-menu as illustrated in the following
display screen.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SECTION 6 6 SECTION
51119110
INPUT CHANNELS
51119110
OUTPUT CHANNELS
51119110
ALARMS
105