DANIEL 2500 User's Reference Manual page 67

MODEL 2500_______________________________________________________ MODEL 2500_______________________________________________________
The SERIAL PORTS Lower Level Sub-Menus are as follows:
COMMID
COMMID2
BAUD1
BAUD2
BAUD3
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SECTION 4 4 SECTION
COMMID lower
communications address for the connected device. The
addresses allowed are 1-247 without zeros in front of the
one and two digit numbers. The default setting is 1.
(Two board units only) COMMID2 lower sub-menu
provides a specific communications address for the
connected device. The addresses allowed are 1-247
without zeros in front of the one and two digit numbers.
The default setting is 1.
BAUD1 lower level sub-menu provides for displaying or
changing the baud rate settings for serial port number 1.
The baud rate selections are 300, 1200, 2400, 4800, and
9600, with the default rate being 1200.
BAUD2 lower level sub-menu provides for displaying or
changing the baud rate settings for serial port number 2.
The baud rate selections are 300, 1200, 2400, 4800, and
9600, with the default rate being 2400.
(Two-board units only) BAUD3 lower level sub-menu
provides for displaying or changing the baud rate settings
for serial port number 3. The baud rate selections are
300, 1200, 2400, 4800, and 9600, with the default rate
being 1200.
sub-menu provides a specific
53