DANIEL 2500 User's Reference Manual page 38

______________________________________________________ MODEL ______________________________________________________
As indicated in the illustrated screen below, this causes a PATH screen to be
overlaid in a window in the right center portion of the screen being viewed. This
is a valid path if this IPL25 program is maintained on a diskette and not transferred
to the hard drive.
If the IPL25 program is transferred to the hard drive, the user will need to add a
directory\subdirectory to the program path.
9. At the PATH screen create a program path similar to
C:\"directory"\"subdirectory"\*.BTA
and press the ENTER key.
A reference window at the bottom of the screen will indicate whether the newly
created program path is a "Valid Path" or an "Invalid Path".
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
24
MODEL 2500 2500
SECTION 3 3 SECTION