DANIEL 2500 User's Reference Manual page 75

MODEL 2500_______________________________________________________ MODEL 2500_______________________________________________________
EXIT Key
-
UP ARROW Key
-
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SECTION 4 4 SECTION
Moves the display to the next higher level menu.
For example, if INPUT CHANNELS and ANALOG INPUTS
are active in the configuration, and if the message "ANALOG
INPUTS" is displayed on the bottom line of LCD screen, this
indicates that the current menu level is the INPUT
CHANNELS.
Pressing the EXIT key one time displays the message "INPUT
CHANNELS" on the bottom line, indicating the current menu
level is now the MAIN MENU.
Steps the display up through the selections on the active menu.
For example, if the MAIN MENU is active and the last
selection, SYSTEM COMMANDS is displayed, pressing the UP
ARROW key one time displays the next higher selection on the
MAIN MENU, and the message "ARCHIVES" appears, if
ARCHIVES is active in the configuration.
Pressing the UP ARROW key another time will display the next
higher MAIN MENU selection, SERIAL PORTS.
Holding down the UP ARROW key rather than pressing it one
step at a time causes the display to continue moving up through
the menu selections rather than displaying one selection at a
time. If INPUT CHANNELS is active in the configuration, and
if the UP ARROW key is pressed when the first selection,
INPUT CHANNELS, is displayed, the display does not loop to
the last selection, but continues to read INPUT CHANNELS.
61