DANIEL 2500 User's Reference Manual page 40

______________________________________________________ ______________________________________________________ MODEL
If the Model 2500 has no configuration program, its default baud rate is normally
2400. If the downloaded application replaces a resident program, the baud rate
must match the slave baud rate on the Model 2500 receiving the application.
As indicated in the illustrated screen below, this causes a baud rate list to be
overlaid in a window beneath the BAUDRATE option window at the top of the
screen.
If the user selects a baud rate different than 2400, a "b" prefix, which is a code that
changes the baud rate in the Model 2500, will appear just before the baud rate
number in the reference screen. At this point, the user should press the ENTER
key.
13. Once the desired baud rate has been selected and entered, use the arrow keys
to move from the BAUDRATE option window at the top of the screen to the
COMMID option window and press the ENTER key.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
26
MODEL 2500 2500
SECTION 3 3 SECTION