DANIEL 2500 User's Reference Manual page 69

MODEL 2500_______________________________________________________ MODEL 2500_______________________________________________________
PARITY1
PARITY2
PARITY3
STOPBIT1
STOPBIT2
STOPBIT3
PRTCLSLV
PRTCLSLV2
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SECTION 4 4 SECTION
PARITY1 lower level sub-menu provides for displaying
or changing the parity of serial port number 1 (EVEN,
ODD, NONE), with the default parity being EVEN.
PARITY2 lower level sub-menu provides for displaying
or changing the parity of serial port number 2 (EVEN,
ODD, NONE), with the default parity being EVEN.
PARITY3 lower level sub-menu provides for displaying
or changing the parity.
STOPBIT1 lower level sub-menu provides for displaying
or changing the number of stopbits transmitted from
serial port number 1 (1, 1 1/2, 2), with the default stopbit
setting being 1.
STOPBIT2 lower level sub-menu provides for displaying
or changing the number of stopbits transmitted from
serial port number 2 (1, 1 1/2, 2), with the default stopbit
setting being 1.
(Two-board units only) STOPBIT3 lower level sub-menu
provides for displaying or changing the number of
stopbits transmitted from serial port number 3 (1, 1 1/2,
2), with the default stopbit setting being 1.
PRTCLSLV lower level sub-menu provides for displaying
or changing the type of communications used by any one
of the serial ports, which is defined in the portuse section
as a SLAVE (MODASCII or MODRTU), with the default
type being MODASCII.
(Two-board units only) PRTCLSLV2 provides the same
function as PRTCLSLV for two-board units.
55