Operator Command Reports - DANIEL 2500 User's Reference Manual

______________________________________________________ ______________________________________________________ MODEL

OPERATOR COMMAND REPORTS

An operator can print a report manually at the front panel of the MODEL 2500 by
performing the following procedure.
- Begin with the MAIN MENU
- Locate and display the sub-menu REPORTS using the arrow keys
- Press the ENTER key
- Locate and display the report name (for example, AMREPORT) by
using the arrow keys
- Press the ENTER key
At this point, the report should be printed out on the line printer.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
122
MODEL 2500 2500
SECTION 7 7 SECTION