DANIEL 2500 User's Reference Manual page 154

______________________________________________________ MODEL ______________________________________________________
ENTRY
CLEAR
CLEARALL
INTERVAL
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
140
EXPLANATION
-C-
CLEAR provides for clearing totalizers. Two different
sets of selections are possible:
- CLEAR and IDLE
- YES and NO
CLEAR resets the totalizer, and IDLE maintains
cumulative totals on the totalizer.
YES resets the totalizer after printing a report, and NO
maintains cumulative totals on the totalizer.
CLEARALL provides
(accumulators). The selections are NO, which does not
clear totalizers, and YES, which clears totalizers.
-I-
INTERVAL provides for selecting the frequency for
printing timed reports. Selections are identified by an
abbreviation of the time interval between report printouts.
In other words, HOUR1 (sometimes HOURX1) provides
for a 1 hour interval between printouts.
MODEL 2500
for clearing all
APPENDIX C C APPENDIX
2500
totalizers