Constant/Variable Status - DANIEL 2500 User's Reference Manual

MODEL 2500_______________________________________________________ MODEL 2500_______________________________________________________

CONSTANT/VARIABLE STATUS

The status of the constant or variable can be from 1 to 8 characters in length, and
in the illustrations in the following sub-section entitled TYPE OF DISPLAY, the
statuses are represented by the characters "sssssss". Definitions of typical status
display abbreviations are shown in the following table.
Status Display
Abbreviation
MANUAL
blank
LIVE
FIXED
Z SCALE
F SCALE
LO LO
LO
HI
HI HI
RATE
* Detailed explanations of the status abbreviations MANUAL, blank, LIVE,
and FIXED are provided in Section 6, under the sub-section entitled,
CHANGING THE STATUS OF A VARIABLE.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SECTION 5 5 SECTION
Value used in the calculations is
currently the FIXED value.*
Value used in the calculations is
currently the LIVE value.*
Current value from transmitter input*
Operator-entered over-ride value*
Zero-scale value
Full-scale value
Lo Lo alarm limit
Lo alarm limit
Hi alarm limit
Hi Hi alarm limit
Rate of change limit
Definition
81