DANIEL 2500 User's Reference Manual page 126

______________________________________________________ MODEL ______________________________________________________
Select the table column by pressing the DOWN arrow key until the desired
column number appears on the display screen in the position to the right of
the slash. (This example assumes the user entered a new column number of
2.)
When the new column number is visible in the display screen, the user
presses the EXIT key, and then the DOWN arrow key once, which causes
the following illustrated display screen to appear.
Press the ENTER key to indicate the second column and display the
following illustrated display screen.
The 9/2 configuration indicates the row and column position being displayed
in TABLE 18. The bottom right portion of the display screen is blank,
because the variable has no units. If the table value had engineering units,
the values would appear in the blank space.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
112
TABLE 18
TAPTYP
TABLE 18
0.606
9 / 2
2
9 / 2
MODEL 2500 2500
SECTION 6 6 SECTION